Official Website of the Wisconsin
Department of Safety and Professional Services
Department of Safety and Professional Services
|
Resources
Office of Governor
Scott Walker 
|
Safety and Buildings Division Education Utility Contractor S&B fall and winter 2011-12 plumbing and POWTS education - PDF brochureClasses that are listed are those submitted by providers. To list an approved class. People taking the courses should check to be sure the course is currently approved and valid for their credential.
Classes on a Specific Date *** None at this time. --------------- Gary Klinka Classes *** Utility Contractor: 6 credit hours; Exterior Plumbing Definition Quiz; 180 simple questions on plumbing definitions.; Available at all times;Course can be printed from my website www.garyklinka.com or request by emailing: garyklinka@hotmail.com or by calling for live support at 920-727-9200, 920-740-6723, 920-740-4119, or by mailing your request to Gary Klinka, 228 Mandella Ct., Neenah WI 54956. Available at all times. Payment is due at completion.; S&B course #12444; Approval expiration date 02/16/2016. *** Utility Contractor 6 credit hours; Comm 5 Plmb Quiz; Course is on licensing and definitions based on Comm 5; Courses can be obtained by printing from the Web site www.garyklinka.com, requesting by mail, emailed as attachments, or information faxed; Email or call garyklinka@hotmail.com, 920-727-9200, or 920-740-6723. Course approval expiration date is 07/27/2012. --------------- RS Logical Classes *** Utility Contractor, 3 credit hours continuing ed; “Definitions Standards and Testing” - Use a computer, tablet or even a smart phone to answer questions on material standards, code definitions and installation testing; Register and complete online at http://www.rslogical.com/; S&B course 9218 approval expiration date is 01/14/2013. *** Utility Contractor, 3 credit hours continuing education; “Sanitary Sewers” - Use a computer, tablet or even a smart phone to answer questions on sizing and installing sanitary sewrs with plans supplied; Register and complete online at http://www.rslogical.com/; S&B course #12771 approval expiration date is 06/20/2016. *** Utility Contractor, 3 credit hours continuing education; “Storm Sewer Calculations” - Use a computer, tablet or even a smart phone to calculate and size the installation of a storm sewer from a site plan supplied; Register and complete online at http://www.rslogical.com/; S&B course #12796 approval expiration date is 07/07/2016. *** Utility Contractor: 3 Credit Hours; Soil Testers 1; Brush up on Soil and Site Evaluation rules found in Chapter Comm 85. Complete entirely online anytime. Available at all times; Register online at www.rslogical.com; S&B Course #10004; approval expiration date is 09/29/2013. *** Utility Contractor 3 credit hours; Online Review of Plumbing, Definitions, Standards And Testing; Register at www.rslogical.com; Questions? tech@rslogical.com; S&B course 9218 approval expiration date is 01/14/2013. --------------- Safety and Buildings Classes ***Storm Plan Review and Application / OSHA Trenching and Excavation Construction Update Safety and Buildings Division Course #12838 Fee $30 PDF brochure Three hours credit for MP, MPRS, JP, JPRS, UDC Plbg Insp, Comm Plbg Insp, and Utility Contractor Dec. 7, 2011 - Stevens Point *** Utility Contractor: 3 credit hours; Sizing the Building Water Supply System; Video course available at all times; A presentation by S&B Plumbing Consultant Don Hough recorded in 2006 via the UW WisLine Web online education system. Sizing a building water service and distribution system.; To register, go to http://dsps.wi.gov/SB/SB-DivContinuingEdVideo.html; S&B course #6485; Approval expiration date 7/21/2014. --------------- Technical Training Classes *** Utility Contractor: 12 credit hours; Electric Motors and Control Systems; Introduces the fundamental concepts, principles, and devices involved in industrial motor control. Emphasis is placed on developing a theoretical foundation of industrial motor control devices. Check our website for a course outline.; Register for classes at www.technicaltrainingclasses.com; $55.00, Available at all times; S&B course #12010; Approval expiration date is 09/29/2015. *** Utility Contractor: 7 credit hours; Electric Motors and Control Systems; Electric Motors and Control Systems Part 1. This course is part 1 of the full course. This is for those who want to complete the full course in stages. Introduces the fundamental concepts, principles, and devices involved in industrial motor control. Emphasis is placed on developing a theoretical foundation of industrial motor control devices. Check our website for a course outline.; Register for classes at www.technicaltrainingclasses.com; $35.00, Available at all times; S&B course #12006; Approval expiration date is 09/29/2015. *** Utility Contractor: 8 credit hours; Electric Motors and Control Systems; Electric Motors and Control Systems Part 2. This course is part 2 of four of the full course. This is for those who want to complete the full course in stages. Introduces the fundamental concepts, principles, and devices involved in industrial motor control. Emphasis is placed on developing a theoretical foundation of industrial motor control devices. Check our website for a course outline.; Register for classes at www.technicaltrainingclasses.com; $35.00, Available at all times; S&B course #12007; Approval expiration date is 09/29/2015. *** Utility Contractor: 6 credit hours; Electric Motors and Control Systems; Electric Motors and Control Systems Part 3. This course is part 3 of 4. This is for those who want to complete the full course in stages. Introduces the fundamental concepts, principles, and devices involved in industrial motor control. Emphasis is placed on developing a theoretical foundation of industrial motor control devices. Check our website for a course outline.; Register for classes at www.technicaltrainingclasses.com; $35.00, Available at all times; S&B course #12008; Approval expiration date is 09/29/2015. *** Utility Contractor: 7 credit hours; Electric Motors and Control Systems; Electric Motors and Control Systems Part 4. This course is part 4 of 4. This is for those who want to complete the full course in stages. Introduces the fundamental concepts, principles, and devices involved in industrial motor control. Emphasis is placed on developing a theoretical foundation of industrial motor control devices. Check our website for a course outline.; Register for classes at www.technicaltrainingclasses.com; $35.00, Available at all times; S&B course #12009; Approval expiration date is 09/29/2015. --------------- Your Continuing Ed Classes *** Utility Contractor: 1 Credit Hour; Plumbing Continuing Ed Test 5; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10128; approval expiration date is 11/19/2013. *** Utility Contractor: 1 Credit Hour; Plumbing Continuing Ed Test 6; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10129; approval expiration date is 11/19/2013. *** Utility Contractor: 1 Credit Hour; Plumbing Continuing Ed Test 8; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10131; approval expiration date is 11/19/2013. *** Utility Contractor: 2 Credit Hours; Plumbing Continuing Ed Test 9; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10132; approval expiration date is 11/19/2013. *** Utility Contractor: 2 Credit Hours; Plumbing Continuing Ed Test 10; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10133; approval expiration date is 11/19/2013. *** Utility Contractor: 4 Credit Hours; Plumbing Continuing Ed Test 11; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10134; approval expiration date is 11/19/2013. *** Utility Contractor: 1.5 Credit Hours; Plumbing Continuing Ed Test 12; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10157; approval expiration date is 11/21/2013. *** Utility Contractor: 1.5 Credit Hours; Plumbing Continuing Ed Test 13; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10158; approval expiration date is 11/21/2013. *** Utility Contractor: 3 Credit Hours; Plumbing Continuing Ed Test 14; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10159; approval expiration date is 11/21/2013. *** Utility Contractor: 3 Credit Hours; Plumbing Continuing Ed Test 15; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10160; approval expiration date is 11/21/2013. *** Utility Contractor: 6 Credit Hours; Plumbing Continuing Ed Test 16; Getting to know the codebook.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10161; approval expiration date is 11/21/2013. *** Utility Contractor: 3 Credit Hours; Comm 5 Cont. Ed Test, Plumbing; Getting to know Comm 5.; Online at www.yourwicontinuinged.com, or call Brett at: (920) 740-4348 for correspondence course or any other questions.; S&B Course #10135; approval expiration date is 11/19/2013. Links -- County Web sites || City/Town/Village Web sites || State Portal || Licensing and Permitting || Build Your Business The Department of Safety and Professional Services Safety and Buildings Division is an equal opportunity service provider and employer. If you need assistance to access services or need material in an alternate format, please contact us, 608-266-3151, TDD Relay dial 711 in Wisconsin or 800-947-3529. |