Skip to main content
Developer shows group around new single-home development site in Wisconsin
Programs

UDC (Uniform Dwelling Code / One- and Two- Family Dwellings)

Program Code Chapter: SPS 320-325

  • Disclaimer: Review WI statute for full program requirements


Overview

The program governing one- and two-family dwelling units (including manufactured homes) is also called the UDC program, referring to the Uniform Dwelling Code. Enforces construction standards and inspection procedures including evaluation of building materials.

Soil Erosion

The UDC team also provides education and information concerning soil erosion control for construction sites involving one- and two-family dwellings. Find specific soil erosion program information throughout this UDC program page.

Permit and Plan Review

A permit under the UDC is required for new one- and two-family dwelling units. This includes stick-built, modular, and manufactured home installations.

Where Can I Get a Permit?

If the municipality covering your project location has been delegated authority to issue permits, and the project is not for a state-owned building or land, contact the municipality directly.

Use the UDC Delegated Agent List to determine if your municipality has authority to permit and inspect your project.

If your municipality does not have the proper authority, submit your application to DSPS via esla.wi.gov. See the eSLA Information page for getting started in eSLA.

What do I need to submit to DSPS?

Regardless of which agency has authority, your application must include:

  1. Permit application. This may be electronic or paper, depending on the agency.

  2. Contractor license numbers and expiration dates.

  3. Legible building plans with scale or dimensions. Include:

    1. Site and Erosion Control Plan

    2. Floor Plan

    3. Elevation detail (all four sides)

  4. Required Data:

    1. REScheck

    2. Truss Plans

    3. Water Calculation

    4. Wall Bracing Worksheet

  5. Permit application fee.

Inspection

The following inspections are required on new one- and two-family dwellings. When ready for inspection, notify the inspector identified on your UDC permit.

  1. Footings (includes excavation, etc.)

  2. Foundation and foundation reinforcement

  3. Rough (includes electrical, plumbing, HVAC, framing, etc.)

  4. Insulation

  5. Final

Contact Us

If the municipality covering your project location has been delegated authority to issue permits and inspections, and the project is not for a state-owned building or land, contact the municipality directly.

Use the UDC Delegated Agent List to determine if your municipality has authority to inspect your project.

If the municipality does not have proper authority, use the Inspector Look-Up Tool to determine the DSPS-appointed inspector for your county.

DSPS maintains program-specific email inboxes (tech boxes) to answer general code questions. Responses should not be construed as formal code interpretations nor do they supersede any previously issued correspondence from DSPS. Tech boxes should not be used for projects where code officials are already involved.

For general questions not related to specific programs or technical codes, use these contacts:

Subscribe to email updates from DSPS and receive upcoming announcements and notifications.

  1. Go to https://public.govdelivery.com/accounts/WIDSPS/subscriber/new

  2. Enter your email address and click Submit.

  3. Under Subscription Topics, expand the Industry Updates section.

  4. Check all the topics of interest to you.

  5. Scroll to the bottom and click Submit.

More Information

Related Pages

You may be interested in the pages below.

Codes and Statutes

Explore current and past codes and statutes for DSPS public safety programs.

Credentialing

Find DSPS credential information related to this program.

Back to top button